Marvel Ironworkers: Models: MSIW126D/DX

MSIW126D/DX- Heavy-Duty, Dual Cylinder, Completely Integrated Ironworker with 126 Ton Capacity, 15 H.P., 14” (D) 24-1/2” (DX) Throat Depth, 5 Work Stations and Simultaneous Dual Operation.

PRODUCT DESCRIPTION

PUNCHING:

   Punch Pressure: 126 tons.

   Quick Change Punch Holder and Jog Mode

   Punch Work Table: Includes back gauge and adjustable stops.

   Standard Tooling: 1-5/16” x 1”.

   Large Tooling: 2-1/8” x 5/8”.

   Oversize Tooling: 4-5/16” x 3-16”.

   Throat Depth: 14” (D); 24-1/2” (DX).

   Stroke Length: 3-1/8”.

   Cycles per Minute in 3/4”: 25.

   Punching Station Work Height: 43-6/8”.

FLAT BAR SHEARING:

   Flat Bar Shear Capacity: 15” x 1”.

   Width x Thickness: 24” in 5/8”.

   Lower Blade: Four (4) usable edges.

   Support Table: Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right.

   Adjustable Hold-Down: Holds work piece securely in position when shearing.

   Upper Shear Blade: Provides for minimum distortion. Two (2) usable edges.

   Blade Length: 24”.

   Angle Flange Trim: 5” x 5/8″.

   Flat Bar Shear Work Height: 37”.

ANGLE SHEARING:

   90 degrees: 6” x 6” x 5/8”.

   45 degrees: 3-1/8” x 3-1/8” x 3/8”.

   Shearing with no material loss and minimum deformity.

   Shear Blades: Four (4) usable edges.

   Angle Shear Work Height: 48”.

BAR SHEARING:

   Round Bar Capacity: 2-1/8”.

   Square Bar Capacity: 2”.

   Channel Shear: 7-3/4” x 3-1/2″.

   H-Beam Shear: 7-3/4” x 3-1/2″.

   T-Beam Shear: 4-3/4″ x 1/2″.

   Bar Shear Work Height: 37”.

NOTCHING:

   Rectangular Notcher: 1/2” x 2-3/8” x 4”.

   Large V: 4″ x 4″ x 1/2″.

   Electrical Interlock Safety Guard

   Gauge Table with Stops: For precise positioning.

   Notcher Work Height: 37”.

Special Tooling:

   Single V Press Brake: 10″ x 7/8″.

   Multi V Press Brake: 27-1/2″ x 1/8″.

Additional Specifications:

   Drive Motor: 14.75 H.P.

   Net Weight: 6,548 lbs.

   Machine Dimensions: 87″ x 35″ x 76″.

   Power (Pressure): 126 tons.

OTHER STANDARD EQUIPMENT:

Five (5) Sets of Punches and Dies:

   Punches: 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”

   Dies: 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”

   CPD Series: 26 punch, 62 die

   Magnetic Base Work Light

   Adjustable Electric Back Gauge (39”)

   24 Volt DC Control Voltage

   Scrap Boxes at Punching and Notching Stations

   Adjustable Stroke Depth at Punch

   Two (2) Full-Control Foot Pedals

   Two (2) Hole Die Holder

   Two (2) Piece Gauging Table at Punch Station

   Keyed Punch Holder for Shaped Tooling

   Standard Voltage 230/460 Volt, 3 Phase, 60Hz

SPECIFICATIONS

Punching Pressure          126 Tons              Capacity 45°        3-1/8” x 3-1/8” x 3/8”

Large Tooling     2-1/8” x 5/8”      Capacity 90°        6” x 6” x 5/8”

Oversize Tooling               4-5/16” x 3/16” Angle Shear Work Height             48″

Standard Tooling              1-5/16” x 1”                      

Throat Depth     14” (D); 24-1/2” (DX)                     

Stroke Length    3-1/8”                  

Punching Station Work Height    43-3/4”                                

Round Bar Capacity         2-1/8”                  

Square Bar Capacity        2”                           

Channel Shear   7-3/4″ x 3-1/2″                 

T Beam                 4-3/4″ x 1/2″                     

Rectangular Notcher      1/2” x 2-3/8” x 4”                             

Flat Bar Shear Capacity 15” x 1”                               

Maximum Width x Thickness      24” x 5/8”                           

Blade Length      24”                        

MORE INFO

Marvel Irownworker Brochure (Click here)

Premier is proud to partner with Marvel and their Irownworkers aong with all their Sawing prodducts.

Learn More from your Solution Providers – Premier Machine Tool Midwest – 414-254-5150 / info@pmtmidwest.com